Luminous Solar Charge Controller- SC C1220NM – 12V/24V
Luminous 10 Amp 12v/24v Solar Charge Controller is an advanced micro controller unit based on PWM technology. The charging process has been optimized for longer battery life and improved system efficiency.
Features:
- Warranty - 12 Months
- Very High Efficiency
- Auto Sensing of 12V/24V battery(s)
- In-built electronic load and battery protection
- Optimized battery charging current for faster charging
- PV reverse current flow protection
Luminous Solar Inverter – NXG 1150
Luminous Solar Inverter - NXG 1150 is a 850VA pure sine wave solar inverter with ISOT technology. It can be used to power homes, offices, and shops. It has a maximum supported panel power of 850Wp and a charge controller rating of 50 Amp. It supports single battery and comes with a 24-month warranty.
Product Features: -
Capacity (VA): 850VA Operating Voltage 90V-290V Max supported panel power: 12V upto 850 Wp Charge Controller Rating - 50 Amp Supports single battery 24 Month Warranty BIS certified as per IS/IEC standards which is mandatory for all solar inverters 3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT). Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings. Powerful charging even at low voltage (90V) making it ideal for areas having low voltage issues. Pure Sine wave output for safety of your sensitive appliances and noiseless operations. Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown.
Luminous Solar Inverter – NXG 2350
Capacity (VA): 2000VA
Operating Voltage: 90V-290V
Max supported panel power: 24V upto 2000 Wp
Charge Controller Rating: 55 Amp
Supports double battery
24 Months Warranty
Solar Mode: The inverter uses only solar power to power your appliances.
Grid+Solar Mode: The inverter uses grid power to power your appliances and stores solar power in the battery for later use.
BIS certified as per IS/IEC standards which is mandatory for all solar inverters
3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode
Intelligent load sharing: This feature ensures that the inverter distributes the load evenly between the solar power and the battery power.
View daily solar generation data in all new LCD display screen
Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings
Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT)
Pure Sine wave output for safety of your sensitive appliances and noiseless operations
Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown
Luminous Solar Inverter – NXG 850
Luminous Solar Inverter - NXG 850 is a 500VA pure sine wave solar inverter that is designed for homes and small businesses. It has a maximum supported panel power of 500Wp and a charge controller rating of 30 Amps. The inverter supports single battery and comes with a 2-year warranty.
Product features:-
Capacity (VA): 500VA Operating Voltage 90V-290V Max supported panel power: 12V upto 500 Wp Charge Controller Rating - 30 Amp Supports single battery 24 Month Warranty BIS certified as per IS/IEC standards which is mandatory for all solar inverters 3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT). Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings. Powerful charging even at low voltage (90V) making it ideal for areas having low voltage issues. Pure sine wave output: This ensures that the inverter can power sensitive appliances without causing any damage. Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown. Wide operating voltage range: The inverter can operate in a wide voltage range of 90V to 290V, making it suitable for areas with fluctuating power supply. Intelligent Solar Optimization Technique (ISOT): This technology helps to maximize the use of solar energy by intelligently switching between solar and grid power. 3 user-settable saving modes: The inverter has three user-settable saving modes: Solar Mode, Solar+Grid Mode, and Grid+Solar Mode. Max capacity utilization: The inverter can be connected to solar panels up to its VA rating, which helps to maximize the use of solar energy. Intelligent load sharing: The inverter intelligently shares the load between solar and battery power, which helps to extend the battery life.
Luminous Solar Inverter NXG 1450
Product Description:-
Luminous NXG 1450 is a 1100VA pure sine wave solar inverter that is designed for home use. It has a maximum supported panel power of 1100Wp and a charge controller rating of 60 Amp. It supports single battery and has a 24-month warranty. Max supported panel power: 12V upto 1100 Wp Charge Controller Rating - 60 Amp Supports single battery 24 Month Warranty BIS certified as per IS/IEC standards which is mandatory for all solar inverters 3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode View daily solar generation data in all new LCD display screen Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT). Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings. Powerful charging even at low voltage (90V) making it ideal for areas having low voltage issues. Pure Sine wave output for safety of your sensitive appliances and noiseless operations. Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown. Capacity: 1100VA Operating Voltage 90V-290V, The NXG 1450 is likely to have a capacity of around 1.1 kW (kilowatts), which means it can handle a certain amount of solar panel capacity for generating electricity. Hybrid Inverter: It is a hybrid inverter, which means it can work both as a solar inverter and as a regular inverter with battery backup. This allows you to store excess solar energy in batteries for use during cloudy days or at night. MPPT Charge Controller: It may come with an MPPT (Maximum Power Point Tracking) charge controller, which optimizes the efficiency of energy conversion from solar panels. LCD Display: Many Luminous solar inverters come with an LCD display to provide information about system status, electricity generation, and other important data. Grid Connectivity: It should be capable of connecting to the grid, allowing you to feed excess electricity back into the grid and potentially earn credits or save on your electricity bills through net metering (subject to local regulations). Battery Compatibility: The NXG 1450 is likely compatible with various battery types, including lead-acid and lithium-ion batteries, for energy storage. Protections: It may offer various protection features such as over-voltage protection, short-circuit protection, and surge protection to ensure the safety of the system.
Luminous Solar Inverter NXG 1850
Product Features:-
Capacity (VA): 1500VA Operating Voltage 90V-290V Max supported panel power: 24V upto 1500 Wp Charge Controller Rating - 50 Amp Supports double battery 24 Month Warranty BIS certified as per IS/IEC standards which is mandatory for all solar inverters 3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode View daily solar generation data in all new LCD display screen Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT). Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings. Powerful charging even at low voltage (90V) making it ideal for areas having low voltage issues. Pure Sine wave output for safety of your sensitive appliances and noiseless operations. Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown.
Luminous Solar Panel 270 Watt – 24 Volt
Luminous solar panel 270 Watt - 24 Volt is used to generate electricity from solar panels. It is connected with inverters for generated electricity to make use in homes and offices. since 270 watt solar panel is 24 volt, it is must that it should be connected with 24 volt (2 battery system) inverter. A single 270 watt panel generates 8.3 amps current when sun is at peak between 11 am - 3 pm.
Luminous Solar Panel Mono PERC 395W / 24V
Excellent Low-light performance
Use of high quality glass and solar cell surface coating allow for excellent performance even in low-light conditions on cloudy days, mornings and evenings.
Advance EVA Encapsulation
EVA‚ (ethyl vinyl acetate) is used‚ encapsulate‚ material. They are inserted between the solar cells and the top surface and the rear surface for protection. Luminous Solar Panel comes with Multi layer encapsulation that provides better module protection.
Severe Weather Resilience
Luminous Solar Panel offers high torsion resistance against wind load and snow loads. These are waterproof and corrosion resistant.
Best in Class Efficiency
Best in class module conversion efficiency through advanced innovative cell technology. This ensures optimum solar power generation that provides value for money.
PID resistance Technology
PID stands for potential-induced degradation. Caused by‚ stray currents triggered by certain climate conditions; the phenomenon can cause substantial power loss but with PID Resistance Technology, Luminous Solar Panels displays no PID.
Features
- Advanced EVA encapsulation to give better protection to modules
- Best in Class conversion efficiency
- Anti-reflective coating for more light absorption
- Optically, mechanically and electrically tested
- High strength Aluminium frame design to offer high torsion resistance
- Compliance to IEC standards"
- Excellent Low-light performance
- Mono PERC Cells type Panel.
- Capacity - 380W, 24V
- Voltage: Voltage at Max Power (Vmax) – 39.33V, Open Circuit Voltage (Voc) – 47.16V
- Current: Current at Max Power (imax) – 9.66A, Short Circuit Current (isc) – 10.26A
- 25 years performance warranty.
- BIS certified as per IS/IEC standards which is mandatory for all solar panels.
- Best in Class conversion efficiency
- Anti-reflective coating and back surface (BSF) for more light absorption
- Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules
- High strength light-weight aluminium frame design for high torsion resistance against winds and snow loads
- PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions
- Excellent Low light performance in low visibility in clouds, evening, and morning.
Luminous Solar Panel Mono PERC 395W / 24V (Pack of 3)
Excellent Low-light performance
Use of high quality glass and solar cell surface coating allow for excellent performance even in low-light conditions on cloudy days, mornings and evenings.
Advance EVA Encapsulation
EVA‚ (ethyl vinyl acetate) is used‚ encapsulate‚ material. They are inserted between the solar cells and the top surface and the rear surface for protection. Luminous Solar Panel comes with Multi layer encapsulation that provides better module protection.
Severe Weather Resilience
Luminous Solar Panel offers high torsion resistance against wind load and snow loads. These are waterproof and corrosion resistant.
Best in Class Efficiency
Best in class module conversion efficiency through advanced innovative cell technology. This ensures optimum solar power generation that provides value for money.
PID resistance Technology
PID stands for potential-induced degradation. Caused by‚ stray currents triggered by certain climate conditions; the phenomenon can cause substantial power loss but with PID Resistance Technology, Luminous Solar Panels displays no PID.
Features
- Advanced EVA encapsulation to give better protection to modules
- Best in Class conversion efficiency
- Anti-reflective coating for more light absorption
- Optically, mechanically and electrically tested
- High strength Aluminium frame design to offer high torsion resistance
- Compliance to IEC standards"
- Excellent Low-light performance
- Mono PERC Cells type Panel.
- Capacity - 380W, 24V
- Voltage: Voltage at Max Power (Vmax) – 39.33V, Open Circuit Voltage (Voc) – 47.16V
- Current: Current at Max Power (imax) – 9.66A, Short Circuit Current (isc) – 10.26A
- 25 years performance warranty.
- BIS certified as per IS/IEC standards which is mandatory for all solar panels.
- Best in Class conversion efficiency
- Anti-reflective coating and back surface (BSF) for more light absorption
- Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules
- High strength light-weight aluminium frame design for high torsion resistance against winds and snow loads
- PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions
- Excellent Low light performance in low visibility in clouds, evening, and morning.
Luminous Solar Panel Mono PERC 395W / 24V (Pack of 6)
Excellent Low-light performance
Use of high quality glass and solar cell surface coating allow for excellent performance even in low-light conditions on cloudy days, mornings and evenings.
Advance EVA Encapsulation
EVA‚ (ethyl vinyl acetate) is used‚ encapsulate‚ material. They are inserted between the solar cells and the top surface and the rear surface for protection. Luminous Solar Panel comes with Multi layer encapsulation that provides better module protection.
Severe Weather Resilience
Luminous Solar Panel offers high torsion resistance against wind load and snow loads. These are waterproof and corrosion resistant.
Best in Class Efficiency
Best in class module conversion efficiency through advanced innovative cell technology. This ensures optimum solar power generation that provides value for money.
PID resistance Technology
PID stands for potential-induced degradation. Caused by‚ stray currents triggered by certain climate conditions; the phenomenon can cause substantial power loss but with PID Resistance Technology, Luminous Solar Panels displays no PID.
Features
- Advanced EVA encapsulation to give better protection to modules
- Best in Class conversion efficiency
- Anti-reflective coating for more light absorption
- Optically, mechanically and electrically tested
- High strength Aluminium frame design to offer high torsion resistance
- Compliance to IEC standards"
- Excellent Low-light performance
- Mono PERC Cells type Panel.
- Capacity - 380W, 24V
- Voltage: Voltage at Max Power (Vmax) – 39.33V, Open Circuit Voltage (Voc) – 47.16V
- Current: Current at Max Power (imax) – 9.66A, Short Circuit Current (isc) – 10.26A
- 25 years performance warranty.
- BIS certified as per IS/IEC standards which is mandatory for all solar panels.
- Best in Class conversion efficiency
- Anti-reflective coating and back surface (BSF) for more light absorption
- Advanced EVA (ethyl vinyl acetate) encapsulation to give better protection to modules
- High strength light-weight aluminium frame design for high torsion resistance against winds and snow loads
- PID resistance Technology (Potential-Induced Degradation) for safety against substantial power loss due to stray currents triggered by certain climate conditions
- Excellent Low light performance in low visibility in clouds, evening, and morning.
Luminous Solar PCU – NXT+ 3.75 KVA
- Charge Controller - MPPT, Input Voltage 80-165 Voc
- Rated AC power - 230V, 13A, Single phase
- Nominal Battery Bank Voltage - 48V
- Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) - 65-130V
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- Inbuilt isolation transformer to protect from grid surges and noise
- Selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display for time charging, Supply etc
- Dual MCB protection against short circuit protection for AC and DC
- Pure sine wave output for safety and noiseless operation of connected appliances.
- Intelligent system with 32 bit DSP Controller which enables it to handle multiple algorithms efficiently
- Compliance to most of the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge.
Luminous Solarverter PRO PCU – 2 KVA
Product Description:-
Solarverter PRO PCU - 2 KVA is a solar inverter that is designed for off-grid solar systems. It has a capacity of 2 kVA, which means it can run many appliances with a total load of up to 2000 watts. The Solarverter PRO PCU has a number of features that make it a good choice for off-grid solar power systems, MPPT charge controller: The MPPT charge controller in the Solarverter PRO PCU allows it to extract the maximum power from solar panels, even in low-light conditions. Isolation transformer: The isolation transformer in the Solarverter PRO PCU protects the system from grid surges and noise. User-selectable source priority: The Solarverter PRO PCU allows you to choose the source of power that the system will use first. You can choose from solar, battery, or grid. Pure sine wave output: The Solarverter PRO PCU produces pure sine wave output, which is ideal for sensitive electronics. Comprehensive protection features: The Solarverter PRO PCU has a number of protection features to protect the system from damage, including short-circuit protection, reverse polarity protection, and battery overload protection. Rated AC power - 230V (single phase) Max Supported Panel Power - 2500 Wp, Input Voltage Range (Vmp) – 45V-85V Charge Controller - MPPT, Input Voltage Range (Voc)- 57V-100V Nominal Battery Bank Voltage - 24V BIS certified solar inverter Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Luminous Solarverter PRO PCU – 3 KVA
Product Features: -
Rated AC power - 230V (single phase) Max Supported Panel Power - 3500 Wp,
Input Voltage Range (Vmp) – 60V-120V Charge Controller - MPPT,
Input Voltage Range (Voc)- 75V-150V Nominal Battery Bank Voltage - 36V BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Luminous Solarverter PRO PCU – 5KVA / 48V
Luminous Solarverter PRO PCU - 5KVA / 48V is a solar inverter that can power your home or business with clean, renewable energy. It has a capacity of 5 kilovolt-amperes (KVA), which means it can support up to 5,000 watts of load. The inverter is compatible with 48-volt solar panels and has an MPPT charge controller that can maximize the amount of power generated by your solar panels.
Here are some of the features of the Luminous Solarverter PRO PCU - 5KVA / 48V:
The inverter is also equipped with a number of safety features, including overvoltage protection, undervoltage protection, and overload protection. It is also certified by BIS, which ensures that it meets the highest standards of quality and safety.
Product Features: -
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 5000 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Luminous Solarverter Pro PCU 3.5 Kva 48V
Product Description: -
The Solarverter PRO PCU - 3.5KVA / 48V can be used to power a variety of loads, including lights, fans, refrigerators, and televisions. It can also be used to charge batteries for backup power during a power outage.
Product Features: -
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 3500 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
LUMINOUS TX100T Trolley for Tall Tubular and Flat plate Battery
LUMINOUS TX100T Trolley is a premium inverter battery trolley made from high-grade plastic material. It is suitable for a single tall tubular battery or flat plate battery and can be used with all types of batteries and inverters.
Here are some of the key features of the LUMINOUS TX100T Trolley:
- Suitable for single tall tubular battery or flat plate battery
- Made from high-grade plastic material
- Compatible with all types of batteries and inverters
- Easy to assemble
- Top-notch built wheels
- Screwless for easy battery maintenance
- Dimensions: 23 x 21 x 25 cm (609*332*595 (in mm)
- Weight: 3 kg
