Particulars | Description |
Model | 875/50A 12V |
Nominal Grid Voltage | 230V |
Battery Low Buzzer | 10.8V |
Battery Low Cut | 10.5V |
Battery High Cut | 17V |
SPV Current | 50A |
Grid – Battery Charging Voltage (Equalize) | After 30 Days |
Grid – Battery Charging Current | 10A/12.5A |
Grid Reconnect @ Battery Voltage | 11.8V |
Output Phase | 1 Phase, 3Wire |
Nominal Output Voltage | 240V±5% |
Nominal Frequency | 50Hz±1% |
Output Waveform | Modified Sinewave |
Typical Efficiency | ≥80% |
Protection | Overload, Battery Low, Battery High, Output Short, Battery Reverse, Phase Reverse, Over Heat, SPV High. |
LED Indication | System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable, Mains Status, Overload, Grid Chg., Inverter ON, Battery Status, SPV Chg., Fault |
Switches | System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable |
Type of Charger | PWM |
Efficiency | >95% |
Input Voltage Range (Min – Max)Voc | 17V-25V |
Maximum PV Power Recommended | (150W/160W) x 4 |
Operating Temperature | 0-50°C |
-27%Sold out
Previous product
Back to products
UTL ALFA+ Solar PCU 10KVA 120V
₹151,200.00 Original price was: ₹151,200.00.₹126,000.00Current price is: ₹126,000.00.
UTL Shamsi 875 – 12V/50A
₹8,305.00 Original price was: ₹8,305.00.₹6,100.00Current price is: ₹6,100.00.
- Built-in IT mode
- Auto equalize in a month
- Inbuilt PWM Solar Charge Controller
- LED Display for Operation & Fault
- Modified sine wave output
- Maintain battery health for longer life
- Battery Charging with Multi stage (Bulk, Absorption & Float)
- Protections: RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV
The Shamsi solar inverter feeds the battery installed to it at a constant boost charging current until its voltage reaches 14.58V and the float current, which maintains the voltage above 13.8V.
A sine wave output is also known as waveform for electronic equipment. The incoming AC line is a sine wave, thus electronic equipment expects to see this type of waveform. A sine wave is the most expensive output form for solar manufacturers to produce due to more complex circuitry and components
Out of stock
Category: Off Grid Solar Inverters
Description
Reviews (0)
Be the first to review “UTL Shamsi 875 – 12V/50A” Cancel reply
Related products
UTL ALFA+ Solar PCU 15KVA 240V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
UTL Shamsi 1475 – 24V/50A
- Built-in IT mode
- Auto equalize in a month
- Inbuilt PWM Solar Charge Controller
- LED Display for Operation & Fault
- Modified sine wave output
- Maintain battery health for longer life
- Battery Charging with Multi stage (Bulk, Absorption & Float)
- Protections: RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV
UTL ALFA+ Solar PCU 10KVA 180V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
Luminous Solarverter PRO PCU – 5KVA / 48V
Luminous Solarverter PRO PCU - 5KVA / 48V is a solar inverter that can power your home or business with clean, renewable energy. It has a capacity of 5 kilovolt-amperes (KVA), which means it can support up to 5,000 watts of load. The inverter is compatible with 48-volt solar panels and has an MPPT charge controller that can maximize the amount of power generated by your solar panels.
Here are some of the features of the Luminous Solarverter PRO PCU - 5KVA / 48V:
The inverter is also equipped with a number of safety features, including overvoltage protection, undervoltage protection, and overload protection. It is also certified by BIS, which ensures that it meets the highest standards of quality and safety.
Product Features: -
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 5000 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
UTL Heliac 3550VA / 48V
- Pure Sine Wave Output
- Protections : RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV
- Compatible with DG as an Input Source
- Compatible with IT Load
- Compatible with SMF, Gel & Tubular Batteries
- Multi-Colour LCD Display
- Frequency Available 50 & 60Hz
- Multi Charging Stage. (Bulk, Absorption & Float)
- Solar Priority for Load & Battery Charging
- Inbuilt PWM Solar Charge Controller
Luminous Solarverter PRO PCU – 2 KVA
Product Description:-
Solarverter PRO PCU - 2 KVA is a solar inverter that is designed for off-grid solar systems. It has a capacity of 2 kVA, which means it can run many appliances with a total load of up to 2000 watts. The Solarverter PRO PCU has a number of features that make it a good choice for off-grid solar power systems, MPPT charge controller: The MPPT charge controller in the Solarverter PRO PCU allows it to extract the maximum power from solar panels, even in low-light conditions. Isolation transformer: The isolation transformer in the Solarverter PRO PCU protects the system from grid surges and noise. User-selectable source priority: The Solarverter PRO PCU allows you to choose the source of power that the system will use first. You can choose from solar, battery, or grid. Pure sine wave output: The Solarverter PRO PCU produces pure sine wave output, which is ideal for sensitive electronics. Comprehensive protection features: The Solarverter PRO PCU has a number of protection features to protect the system from damage, including short-circuit protection, reverse polarity protection, and battery overload protection. Rated AC power - 230V (single phase) Max Supported Panel Power - 2500 Wp, Input Voltage Range (Vmp) – 45V-85V Charge Controller - MPPT, Input Voltage Range (Voc)- 57V-100V Nominal Battery Bank Voltage - 24V BIS certified solar inverter Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.UTL ALFA+ Solar PCU 2KVA 48V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
UTL Gamma Solar PCU 5KVA/96 V
- MPPT Solar charge controller
- Advanced LCD display with multi features
- High efficiency inverter with MPPT
- Capability 100% panel rating
- 2KVA solar panel support
- DSP controlled display
- Cooling temperature fan
- Battery Health For Longer Life
- Pure sine wave inverter
- Utilizes maximum power available from the panel
Reviews
There are no reviews yet.